Expand your art enameling horizons! If you want to add to your skill set, this workshop is for you. This hands-on workshop emphasizes learning a variety of procedures and techniques and achieving consistent results every time. Take both days (recommended) or either one by itself.
- This event has passed.
Enameling II: Building Your Skills “Tool-Kit” Day 1 – 8/17
Saturday, August 17, 2019 - 9:00 AM to Sunday, August 18, 2019 - 4:30 PM EDT$130 – $160
Anyone age 18 or older with any experience in basic enameling (such as our Intro workshop) and a desire to learn more. Even if you are more experienced but have had difficulty getting consistent results or understanding why your piece turned out the way it did, this workshop is for you.
You will create enameled art in this workshop (1-2 projects each day, depending on your skill level), but the emphasis will not be on the beauty of the finished piece. Instead, we will focus on teaching you a large variety of procedures and techniques and how to work with different materials. We also want you to have a better understanding of the variety of enamels available, how they work in different situations and on different materials, and how they work in combination, so you will get the same result every time you use them.
You will benefit from the solid teaching and hands-on work we have put into each day. In Day One (see also Day Two), students will work on two projects, a 24-gauge copper form and a 3” x 4” copper square. We will teach you:
- How to prepare 24-gauge copper for enameling
- How to use a stencil to apply a pattern directly on copper
- How to use copper oxide to add color and texture
- Which transparent colors work best direct on copper over copper oxide and how to use them
- How to use copper oxide flakes to get an iridescent green color
- How to work with a combination of materials and procedures to create lines, shape, and texture in a composition
- How to use heat to burn off oil or grease on copper to prepare for using water-based products
- How to use semi-white and semi-clear enamels
- How to develop lines and shape with sgraffito (scratching through)
- How to fire a piece to use copper oxide as a decorating material
- How to pickle to bring light into a piece with bare copper areas
- How to use transparent colors directly on copper
- How to choose enamel colors and which colors work well next to each other
During this two-day workshop you will receive instruction, handouts, demonstrations, hands-on practice, some individual guidance as needed, and time to complete two enameled art pieces. Whether you complete each piece during the class will depend on your abilities and how quickly you learn the techniques.
Costs include all materials and supplies. In addition, you will get:
- Access to over 150 different enamels for use during the workshop
- Use of the extensive Foundation equipment, furnaces, and tools needed to complete your project
- On-site access to one of the few retail stores in the US offering enamel and enamel supplies
- Exposure and inspiration during our breaks from hundreds of beautiful ancient and modern enameled art pieces in our world-class art enamel museum, the largest diverse collection of art enamels in the world
Enameled jewelry and other objects have been found that were made over 3,000 years ago, many still colorful and recognizable! Is it any wonder that hobbyists, craftsmen, and artists today continue to create beautiful jewelry, bowls, plates, vases and wall art by using a furnace or torch to fuse glass to metal?
Today a tremendous variety of materials and vitreous enamel (colored ground glass) are available designed to be fused to copper, steel, silver, or other media using intense heat. Many different procedures, approaches, and techniques can be used individually or in combination to produce enameled art. In this workshop you will learn multiple approaches within the context of limoge enameling, which is a technique of “painting” with enamel or applying different enamel colors next to each other without the separation of wire or surface metal.
Why enameling? Produce something beautiful and permanent with your own hands and expand your learning! A recent participant who attended this workshop, said “The instruction was detailed and engaging…There are so many techniques covered, it was easy to find something that creatively stimulated me. A+++.” (Mary, Louisville, KY)
Tom Ellis, Our Renowned Instructor
The workshop will be held at the Carpenter Art Enamel Foundation headquarters at 645 Colfax Avenue in Bellevue, KY, right across the river from Cincinnati. We are about ten minutes from downtown Cincinnati, but in an area of northern Kentucky that has less traffic and is a bit easier to navigate than the big city. Although our headquarters is housed in one of the largest facilities in the world dedicated to art enameling, we enjoy being a part of the small river community of Bellevue on the “south bank” of the Ohio river. In fact, the mayor is on our Board of Directors.
We are tucked away in a small, quiet industrial park off Berry Avenue. You will find plenty of parking alongside our building and in a large gravel lot in front of the industrial building next door. For a map and more information, <click here>.
Come with an open mind and a willingness to learn. No other preparation.
Please do not wear sandals, open-toed shoes, scarves or other clothing with tassels or loose ends that could get caught in tools or equipment.
Young and old of various economic means attend our workshops. All are welcome! If you want to save money, we can help. Of course, you will want to start by becoming a Premium Member and saving 15% off the cost of the workshop <click here to join>.
Travel will be the biggest part of your cost unless you live close by. Cincinnati is one of the lowest-cost metropolitan areas to visit, but we can help you get the cost even lower! See this resource page for money-saving travel information that could help you save the entire cost of the workshop, maybe even more: <click here>. If you don’t have a car when you are in town, we might even be able to give you a ride from a nearby hotel.
In addition, you may want to stay a few days extra days to enjoy some of world-class attractions that the Cincinnati area offers (in addition to our workshops!). We have listed some of our favorite places here: <click here>.
If cancelled within 30 days of the workshop, no refunds are issued. If cancelled more than 30 days prior to the workshop, a refund (less a $60 service fee) may be issued if the workshop is fully booked, not including your registration.
If you qualify for a refund, you may apply the total amount to a future workshop conducted in the next 12 months (service fee waived).
Registrations are not transferable.
The Foundation reserves the right to cancel any workshop due to insufficient enrollment and will notify students of any cancellation at least three weeks prior to the start of the workshop. In the event that WWCEF (The Foundation) cancels a workshop the student will receive a full refund.
The Foundation cannot be responsible for airline tickets or other travel costs in the event of a cancellation.
The Foundation is committed to the safety of all students. A series of informational safety procedures have been established for all studio areas that involve some risk of injury in the use of certain equipment. Your instructor will go over safety procedures during your workshop but we would also like for you to be aware of your workshop’s risks before you register for a workshop. As a condition of registration we ask that you read the ‘Safety Procedures Policy’ and acknowledge that you have done so upon registration.
The Foundation makes every effort to ensure students have a safe and meaningful experience while participating in our activities. However, some aspects of work done at The Foundation can involve a certain amount of risk. Work is done with hot equipment i.e. furnaces, kilns and torches. To safeguard The Foundation we ask students to release The Foundation from liability and voluntarily take on the assumption of risk. As a condition of registration we ask that you read the ‘Release of Liability and Voluntary Assumption of Risk’ and acknowledge that you have done so upon registration.
By clicking ‘Buy Now’ you acknowledge that you have read and understand the terms above including the ‘Safety Procedures Policy’ and ‘Release of Liability and Voluntary Assumption of Risk’.
This website has a secure website payment system. You will receive a confirmation email after payment.
You also have the option of calling us and paying by check or credit card. A $35 fee will be charged for cancelled checks. Call 859-291-5901 and ask for Tom.